Guardian in-line sample filter (70-803-1108)

If there are particulates in your samples, there is a risk that they may get trapped in the fine channels of your sample line or within the nebulizer. The Guardian In-Line Particle Filter provides a simple and effective way to eliminate this risk. This particle filter is easily inserted in the sample tubing between the autosampler probe and the nebulizer. It increases the life span of high throughput valves and reduces their maintenance required. Compatible with 1.6mm and 1.3mm Sample tubing.

BENEFITS:

• Reduces the chance of a blocked nebulizer
• Protects high throughput valves from damage from particulate matter.
• Enhances the day-to-day reproducibility of your results
• Purpose-built clog-resistant design
• Incorporates a 120 micron filter
• Available in 1/16 inch (1.6mm) and 1.3mm OD sample tubing
• Filter and Housing Material: HF Resistant PEEK
• Particle build-up is easily removed by back-flushing and ultrasonic cleaning

Guardian in-line sample filter FLYER

Includes:

70-803-0749: Ferrule 1/16 (PKT. 10)

70-803-0748: Ferrule 1.3mm (PKT. 10)

BACK FLUSHING:

Can be conveniently done using an adaptor connected to the Eluo Nebulizer Cleaning Tool

Do you want to be alerted when the filter needs to be back-flushed? The answer to this is quite simple, add our TruFlo Sample Monitor. With the digital display of the TruFlo Sample Monitor, you always know the actual rate of sample uptake (through the filter) to your nebulizer. You can set the upper and lower limits of your acceptable sample flow range and receive a warning on the screen and an audible alarm if the sample flow moves outside the acceptable range. Then you know it is time to back-flush the inline filter.

The QA Kit is a convenient package combining the TruFlo Sample Monitor, Inline Particle Filter, Eluo Nebulizer Cleaning Tool and Eluo Adaptor for Inline Filter.

OEM: 5000-028